Using the Xiaomi Mi Flash Tool, you can easily flash stock & custom firmware on your Xiaomi Mi Android devices. It lets you flash your device with few clicks. The tool is available on all Windows computer including 32 & 64 bits. Here we will show you, how to use Xiaomi Mi Flash Tool.
How to Use Xiaomi Mi Flash Tool
Firstly, you must take a backup of your data. Because you will lose them after flashing your device. Also, charge your device around 30% and more. Make sure that, you have installed Xiaomi USB drivers on your computer.
Step 1: Download the latest version of Xiaomi Mi Flash tool on your computer.
Step 2: Extract the downloaded file and open it. Run the setup file.
Step 3: Now install the Xiaomi Mi Flash tool on your computer.
Step 4: Now, download the official Xiaomi Mi firmware to flash your device.
Step 5: Power off your device. Then press & hold Vol down + Power key to reboot into Download mood.
Step 6: Once your device gets into Download mood, connect it to your computer via USB cable.
Step 7: Now, open the Xiaomi Mi Flash tool on your computer.
Step 8: Press the ‘Select’ button.
Step 9: Select the firmware file for your Xiaomi Mi device. Click Ok.
Step 10: Hit the ‘Flash’ button to start flashing your device.
Step 11: Wait until the process gets finished. When it completed, you will get ‘success’ message at result bar.
Finally, you can reboot your device into Android. Congratulation, you have flashed new firmware on your Xiaomi Mi smartphone.So, Check if everything is working or not.
Readme before leave:
- The Xiaomi Mi Flash tool only works on Xiaomi Mi devices with Qualcomm chipset. It won’t work on other Xiaomi Mi devices that don’t have Qualcomm chipset.
- Flashing will take away all of your data from the device. So, take a backup before starting.
- To flash your Xiaomi Mi smartphone, you need to download the compatible firmware for your device.
- Xiaomi Mi Flash tool is developed and published by Xiaomi Inc.