How To Replace Gas Range?

To replace a gas range, follow these steps:

Turn off the gas supply: Locate the gas shut-off valve behind the range and turn it clockwise to shut off the gas supply.
Disconnect the old range: Carefully pull the range away from the wall, ensuring it is unplugged from the power source. If there is a flexible gas line, disconnect it using an adjustable wrench.
Prepare the new range: Measure the space to ensure the new range will fit. Remove any packaging and accessories, and make sure it is compatible with your gas supply type (natural gas or propane).
Connect the new range: Slide the new range into place, aligning it with the gas supply line. Connect the gas line using an adjustable wrench, ensuring it is tight and leak-free. Plug in the power cord.
Test for leaks: Turn on the gas supply and check for any gas leaks using a gas leak detector solution or soapy water. If there are no leaks, proceed.
Finalize installation: Push the range fully against the wall, ensuring it is level. Follow the manufacturer’s instructions to properly set up and calibrate the new range.
Test the range: Turn on the burners and oven to ensure they are working correctly.

Remember, if you are not comfortable with gas connections or are unsure of any step, it’s best to seek professional assistance to ensure a safe installation.

Measure the dimensions of your existing gas range

To replace a gas range, you need to gather some essential information about your existing appliance. Measuring the dimensions is one crucial step in ensuring a proper fit. Here’s a brief guide to help you with the replacement process:

Height: Measure from the floor to the top of the range, including any backsplash.
Width: Measure the distance between the sidewalls or cabinets that surround the range.
Depth: Measure from the back wall to the front edge of the range, accounting for any protrusions like knobs or handles.
Cooktop cutout: If your range has a built-in cooktop, measure the width and depth of the cutout in the countertop.

These measurements will help you find a new gas range that fits snugly into your kitchen space. Remember to consider clearance requirements and any additional specifications mentioned by the manufacturer of the new appliance.

Research and choose a new gas range

To replace a gas range, follow these steps:

Measure the dimensions of the existing space where the gas range is installed to ensure the new range will fit properly.
Shut off the gas supply to the existing range by turning off the gas valve.
Disconnect the old gas range from the gas supply line and unplug it from the electrical outlet, if applicable.
Prepare the new gas range by removing any packaging materials and accessories.
Connect the gas supply line to the new range using a flexible gas connector, ensuring it is securely tightened.
Plug in the new range to the electrical outlet, if required.
Adjust the range’s leveling feet to ensure it is balanced and stable.
Turn on the gas supply and check for any gas leaks using a soapy water solution.
Test the burners and oven to ensure they are functioning properly.
Read and follow the manufacturer’s instructions for any additional steps or settings specific to your new gas range.

By following these steps, you can successfully replace your gas range with a new one.

Check the gas supply line

To replace a gas range, follow these steps:

Safety first: Ensure the gas supply is turned off and the range is unplugged from the electrical outlet.
Disconnect the old range: Disconnect the gas line from the old range by turning off the gas valve, usually located behind or beside the appliance. Use an adjustable wrench to loosen the connection.
Remove the old range: Slide the old range away from the wall, ensuring no gas or electrical connections are still attached. If needed, ask for assistance as ranges can be heavy.
Prepare the new range: Remove any packaging materials, manuals, or accessories from the new range. Ensure the gas and electrical connections are easily accessible.
Connect the gas line: Apply pipe joint compound or gas-approved sealing tape to the threaded end of the gas line. Carefully attach the gas line to the new range, tightening it securely with an adjustable wrench.
Slide the new range in place: Position the new range back into its designated spot, taking care not to damage the gas or electrical connections.
Test for leaks: Turn on the gas valve and apply a soap and water solution to the gas line connections. If bubbles form, there is a gas leak. In this case, immediately shut off the gas valve and tighten the connection further.
Plug in the range: Plug the new range into the electrical outlet.
Test the range: Turn on the burners and oven to ensure they ignite properly and operate as expected.
Clean up and enjoy: Dispose of any packaging materials, and give the new range a good cleaning before using it to prepare your favorite meals.

Remember, if you’re uncertain or uncomfortable with any step of the process, it’s best to consult a professional for assistance to ensure your safety and the proper installation of your gas range.

Shut off the gas supply

When replacing a gas range, it is essential to take certain precautions to ensure safety. Here’s a step-by-step guide:

Prepare the area: Clear any objects or obstacles around the gas range to provide ample workspace.
Disconnect the old range: Turn off the gas supply valve located behind the range. Refer to the manufacturer’s instructions if needed. Unplug the range from the electrical outlet.
Remove the gas connection: Use an adjustable wrench to disconnect the gas line from the range. Ensure there is no gas leakage by applying a soapy water solution to the connection and checking for bubbles.
Disconnect the vent pipe: If your range has a vent pipe attached, carefully detach it from the wall or ceiling.
Move the old range: With the help of another person, gently slide the old range away from its current position.

Note: It is crucial to follow the manufacturer’s instructions and consult a professional if you are unsure about any steps or if you need assistance.

Disconnect the gas line

To replace a gas range, safety precautions should be followed, and one important step is disconnecting the gas line. Here’s a guide on replacing a gas range:

Turn off the gas supply: Locate the gas shut-off valve behind the range and turn it clockwise to shut off the gas supply. Ensure the valve is completely closed.
Ventilate the area: Open windows and doors to provide adequate ventilation in the kitchen. This helps to dissipate any lingering gas fumes.
Remove the old range: Disconnect the power cord or unplug the range from the electrical outlet. Slide the range away from the wall, ensuring not to damage the gas line.
Detach the gas line: Using an adjustable wrench, carefully loosen and disconnect the gas line from the range’s gas valve. Be cautious not to damage the line or fittings.
Cap the gas line: After disconnecting the gas line, protectively cap it using a gas line cap or plug. This prevents any gas leakage.

Once the gas line is properly disconnected and capped, you can proceed with installing the new gas range. Remember, if you’re unsure or uncomfortable with any step, it’s always best to seek professional assistance for your safety.

Unplug the range from the electrical outlet

To replace a gas range, follow these steps:

Shut off the gas supply: Locate the gas shut-off valve behind the range and turn it clockwise until it is fully closed.
Remove the range grates and burners: Lift off the grates and remove the burners from their positions on the cooktop.
Disconnect the gas line: Using an adjustable wrench, loosen the connection between the gas line and the range’s gas supply pipe. Once loose, carefully detach the line from the range.
Detach the range from the wall: Remove any screws or brackets securing the range to the surrounding cabinets or countertop. Carefully pull the range away from the wall, ensuring it is not still connected to any utilities.
Install the new gas range: Slide the new range into place, aligning it with the designated spot. Secure it to the surrounding cabinets or countertop if necessary.
Connect the gas line: Attach the gas line to the new range’s gas supply pipe, tightening it securely with an adjustable wrench.
Turn on the gas supply: Turn the gas shut-off valve counterclockwise to reopen the gas supply.
Test the range: Light each burner and the oven to ensure they are functioning correctly.
Enjoy your new gas range!: Start cooking and enjoying your newly replaced appliance.

Remember to always exercise caution and follow safety guidelines when working with gas appliances.

Remove the range’s grates and burner caps

To replace a gas range, there are several steps you need to follow:

Disconnect the gas supply: Turn off the gas valve and unplug the power cord to ensure safety.
Prepare the new range: Remove any packaging materials and make sure all accessories are included.
Position the new range: Slide the new range into place, aligning it with the gas and electrical connections.
Connect the gas line: Use a wrench to tighten the gas connection, ensuring there are no leaks.
Connect the power: Plug in the power cord and ensure the range is properly grounded.
Attach the range’s grates and burner caps: Place the grates and burner caps back in their respective positions.
Test the range: Turn on the gas and check for any leaks. Then, test the burners and oven to ensure they are functioning properly.

By following these steps, you can safely and effectively replace a gas range.

Remove the burner heads and the gas burner tubes

To replace a gas range, you need to follow a few steps. First, ensure the gas supply is turned off before starting any work. Next, disconnect the range from the power source. Then, remove the grates, burner caps, and control knobs from the cooktop. After that, lift the cooktop or remove any screws holding it in place to access the burner assembly. Carefully, remove the burner heads and the gas burner tubes from their respective positions. Remember to keep track of how they are connected for easier reinstallation. Once the old parts are removed, you can proceed with installing the new burner heads and gas burner tubes in the reverse order. Ensure they are securely attached and aligned properly. Finally, reassemble the cooktop, reconnect the power, and turn on the gas supply to test the new components.

Remove the control panel and knobs

To replace a gas range, follow these steps:

Turn off the gas supply: Locate the shut-off valve behind the range and turn it off to cut off the gas supply.
Unplug the range: Disconnect the power cord from the electrical outlet to ensure safety.
Remove the burner grates and caps: Lift off the burner grates and carefully remove the burner caps from each burner.
Detach the burners: Unscrew the burners from the range and set them aside.
Take out the racks: Remove any oven racks or other accessories from the oven.
Unscrew the control panel: Use a screwdriver to remove the screws securing the control panel. Gently disconnect any wiring connections.
Detach the knobs: Carefully pull the knobs off the control panel.

Once you have completed these steps, you can proceed with the installation of the new gas range by following the manufacturer’s instructions. Remember to prioritize safety and consult a professional if you’re uncertain about any aspect of the replacement process.

Detach the gas supply line from the range

To replace a gas range, follow these steps:

Shut off the gas supply: Locate the gas shut-off valve behind the range and turn it clockwise to close off the gas supply.
Disconnect the power: Unplug the range from the electrical outlet or switch off the circuit breaker dedicated to the range.
Remove the range grates and burner caps: Lift off the grates and burner caps from the cooktop surface and set them aside.
Disconnect the gas line: Using an adjustable wrench, loosen the connection between the gas supply line and the range’s gas inlet. Once loose, carefully disconnect the gas line from the range.
Prepare the new range: Ensure the new gas range is compatible with the gas supply in your home and meets the necessary safety standards.
Connect the gas line: Attach the gas supply line to the gas inlet of the new range, tightening the connection with an adjustable wrench.
Reassemble and test: Put back the burner caps and grates. Restore power to the range and turn on the gas supply. Test the burners and oven to ensure proper functioning.

Remember to consult the manufacturer’s instructions and consider seeking professional assistance if you are uncertain or uncomfortable performing any of these steps. Safety should always be a top priority when working with gas appliances.

Prepare the new gas range for installation

To replace a gas range, follow these steps:

Measure the space: Ensure the new gas range will fit properly in the designated area, considering both the width and depth.
Turn off the gas: Shut off the gas supply to the existing range by closing the valve located behind it.
Disconnect the old range: Carefully disconnect the gas line and power cord from the old range.
Remove the old range: Slide the old range away from the wall and remove it from the area.
Prepare the new range: Remove any packaging materials, accessories, or protective covers from the new gas range.
Connect the gas line: Attach the gas line to the new range, ensuring it is securely fastened.
Plug in the power cord: Connect the power cord to the appropriate outlet or electrical connection.
Check for leaks: Turn on the gas supply and inspect all connections for any signs of gas leaks using a leak detection solution.
Test the range: Turn on the burners and oven to ensure they are functioning properly.
Secure the range: Slide the new gas range into place and secure it to the wall, following the manufacturer’s instructions.

Remember, if you’re unsure about any step or encounter difficulties, it’s always recommended to seek professional assistance or consult the manufacturer’s guidelines.

Move the new range into position

To replace a gas range, follow these steps:

Disconnect the gas supply: Turn off the gas valve and disconnect the flexible gas line from the old range. Use caution and follow proper safety procedures.
Unplug the power: If your range is electrically powered, unplug it from the wall outlet to ensure safety.
Prepare the space: Clear the area around the range and make sure the new range will fit properly. Measure the space and ensure it meets the manufacturer’s specifications.
Slide out the old range: Gently pull the old range away from the wall, being careful not to damage any surrounding surfaces or flooring.
Clean the area: Take this opportunity to clean the area where the old range was positioned, removing any debris or dirt.
Position the new range: Carefully slide the new range into place, aligning it with the designated area.
Connect the gas supply: Attach the flexible gas line to the new range, making sure it is securely fastened.
Plug in the power: If your new range requires electricity, plug it into a nearby outlet.
Test the range: Turn on the gas and power supply, and test the burners and oven to ensure everything is functioning properly.
Final adjustments: Make any necessary adjustments to level the range and ensure it is stable.

Remember to consult the manufacturer’s instructions and seek professional assistance if you are unsure about any step in the process.

Connect the gas supply line to the new range

To replace a gas range, follow these steps:

Prepare the area: Ensure the gas supply is turned off and the electrical power is disconnected. Clear the space around the old range for easy removal.
Disconnect the old range: Unplug the range from the electrical outlet. If there is a gas shut-off valve, turn it off. Disconnect the gas supply line from the range by loosening the connection.
Remove the old range: Carefully slide the old range out of its position, taking care not to damage any surrounding surfaces.
Prepare the new range: Read the manufacturer’s instructions for the new range. Remove any packaging and attachments, and ensure it is compatible with the gas supply in your home.
Install the new range: Slide the new range into place, aligning it with the designated area. Level the range if necessary using the adjustable feet.
Connect the gas supply: Attach the gas supply line to the new range, making sure the connection is secure.
Finalize installation: Double-check all connections, plug in the electrical cord, and turn on the gas supply valve. Test the range to ensure it functions properly.

Remember, if you are unsure about any step of the process, it’s always best to consult a professional or contact the manufacturer for assistance.

Attach the control panel and knobs

To replace a gas range, follow these steps:

Safety first: Turn off the gas supply and unplug the range from the power source.
Remove the old range: Disconnect the gas line and carefully slide out the old range from its position.
Prepare the new range: Ensure that the new gas range is compatible with your kitchen setup and matches the required dimensions.
Attach the gas line: Connect the gas line to the new range, following the manufacturer’s instructions. Use a gas leak detection solution to ensure there are no leaks.
Position the range: Slide the new range into place, making sure it is level and securely positioned.
Connect the electrical supply: Plug the range into the power outlet or connect it to the electrical circuit according to the manufacturer’s guidelines.
Attach the control panel and knobs: Carefully install the control panel and knobs, aligning them correctly with the corresponding openings.
Test the range: Turn on the gas supply, check for any gas leaks, and verify that the range functions properly.

Remember, if you’re not confident in performing these steps yourself, it’s always recommended to seek professional assistance for safety and proper installation.

Plug in the new range to the electrical outlet

To replace a gas range, follow these steps:

Disconnect the gas supply: Ensure the gas supply valve is turned off before disconnecting the old gas range. This is crucial for safety reasons.
Unplug the range: Remove the power cord from the electrical outlet to disconnect the old range from the power source.
Remove the old range: Carefully slide out the old range from its position, ensuring not to damage the surrounding area or the gas line.
Prepare the new range: Before installing the new range, make sure it is compatible with your gas supply and the electrical outlet requirements. Check the manufacturer’s instructions for any specific preparations needed.
Position the new range: Slide the new range into place, aligning it with the available space and ensuring it is level.
Connect the gas line: Attach the gas line to the new range, following the manufacturer’s instructions and using a wrench to securely fasten the connection.
Plug in the power: Connect the power cord of the new range to the electrical outlet.
Test the range: Once everything is connected, turn on the gas supply and test the new range to ensure it is functioning correctly.

By following these steps, you can successfully replace a gas range in your kitchen.

Install the burner heads and gas burner tubes

To replace a gas range, follow these steps:

Shut off the gas supply: Locate the gas shut-off valve and turn it off to ensure safety.
Disconnect the old range: Unplug the power cord and carefully detach the gas line from the range.
Prepare the new range: Position the new gas range in the desired location and ensure it meets the required clearance and ventilation standards.
Connect the gas line: Attach the flexible gas line to the gas shut-off valve and the gas inlet on the new range, making sure to tighten the connections securely.
Install the burner heads: Place the burner heads onto the range, aligning them with the corresponding burner openings.
Attach the gas burner tubes: Insert the gas burner tubes into the burner heads, ensuring they fit securely.
Test for leaks: Turn on the gas supply and apply a solution of soapy water to all connections. Look for bubbles, which indicate a gas leak. If a leak is detected, turn off the gas supply immediately and tighten the connections.
Test the burners: Turn on the burners and verify that they ignite properly and provide a steady flame.

By following these steps, you can successfully replace a gas range in a safe and efficient manner.

Place the grates and burner caps on the new range

To replace a gas range, follow these steps:

Prepare the area: Ensure the gas supply is turned off and disconnect the existing range from the power source and gas line. Remove any items from the old range.
Measure and prepare the new range: Measure the space where the new range will be installed to ensure a proper fit. Remove any packaging or protective materials from the new range.
Connect the gas line: Install a new gas flex line if necessary, following the manufacturer’s instructions. Connect the gas line to the range, ensuring it is securely fastened.
Position the range: Carefully slide the new range into place, aligning it with the designated area.
Secure the range: Use any provided brackets or screws to secure the range to the surrounding cabinetry or wall, as per the manufacturer’s guidelines.
Connect the power: If applicable, connect the power cord to an electrical outlet or hardwire the range following the electrical code requirements.
Perform a safety check: Double-check all connections and ensure the gas supply is turned on. Test the range to ensure it functions properly.

Remember to consult the manufacturer’s instructions specific to your gas range model for detailed guidance during the replacement process.

Turn on the gas supply

To replace a gas range, follow these steps:

Shut off the gas supply: Locate the gas shut-off valve near the appliance and turn it off to ensure safety.
Disconnect the old range: Unplug the range from the power outlet. If it’s connected to a gas line, detach the flexible gas hose or rigid pipe from the back of the appliance. Use a wrench to loosen the fittings carefully.
Prepare the new range: Make sure the new gas range is compatible with your existing gas supply and electrical connections. Read the manufacturer’s instructions for any specific requirements.
Position the new range: Carefully slide the new range into place, aligning it with the designated space. Ensure there’s sufficient clearance around the appliance for proper ventilation.
Connect the gas line: Attach the flexible gas hose or rigid pipe to the gas supply line at the back of the range. Tighten the fittings securely.
Plug in the power: Connect the range to a grounded electrical outlet.
Check for leaks: Apply a mixture of soapy water to the gas connections and check for any bubbles. If you spot a leak, immediately shut off the gas supply and consult a professional.
Test the range: Turn on the gas supply, ignite the burners, and check if the oven functions properly.

Remember, if you’re unsure about any step in the process, it’s best to consult a qualified professional to ensure a safe and successful gas range replacement.

Check for gas leaks

To replace a gas range, follow these steps:

Prepare the area: Ensure the gas supply is turned off and disconnect the power source. Clear the surrounding area and remove any items from the existing range.
Disconnect the gas line: Turn off the gas valve and disconnect the gas line from the old range. Use an adjustable wrench to loosen the connections.
Remove the old range: Slide the range away from the wall carefully, ensuring not to damage the floor. You may need assistance to lift and remove it.
Prepare the new range: Remove any packaging and accessories from the new range. Verify that it is compatible with your gas connection type.
Connect the gas line: Apply plumber’s tape to the threads of the gas line, then connect it to the new range. Use the wrench to secure the connection tightly.
Position and secure the new range: Slide the new range into place, ensuring it is level. Secure it to the wall or floor if necessary, following the manufacturer’s instructions.
Test the gas connection: Turn on the gas supply and use a soapy water solution to check for any gas leaks. If bubbles form, tighten the connection or seek professional assistance.
Restore power and test the range: Reconnect the power source and test the new range by turning on the burners and oven to ensure they function properly.

Remember to consult the manufacturer’s instructions specific to your gas range model for detailed guidance throughout the process.

Test the new range

To replace a gas range, follow these steps:

Turn off the gas: Locate the gas shut-off valve behind the range and turn it off. Ensure there are no gas leaks before proceeding.
Disconnect the old range: Unplug the range from the electrical outlet and carefully disconnect the gas line. Use an adjustable wrench to loosen the fittings.
Prepare the new range: Ensure the new range is compatible with your kitchen setup and matches the required gas type (natural gas or propane). Read the manufacturer’s instructions for any specific preparations.
Install the new range: Slide the new range into place, aligning it with the existing gas line and electrical outlet. Connect the gas line, tightening the fittings securely. Plug in the range to the electrical outlet.
Check for leaks: Turn on the gas and carefully inspect all connections for leaks. Apply a mixture of soapy water to the fittings and look for bubbles. If a leak is detected, tighten the fittings or seek professional help.
Test the new range: Follow the manufacturer’s instructions to test the functionality of the new gas range. Ensure all burners ignite properly, the oven heats up correctly, and any other features are functioning as intended.
Dispose of the old range: Properly dispose of the old range according to local regulations. Consider recycling options if available.

Remember, if you are unsure about any step in the process, it is advisable to consult a professional for assistance to ensure a safe and successful installation.

Clean up and dispose of the old gas range

To replace a gas range, follow these steps:

Measure the space: Measure the width, height, and depth of the space where the new gas range will be installed. This will help you ensure a proper fit.
Shut off the gas supply: Locate the gas shut-off valve near the old gas range and turn it off to cut off the gas supply.
Disconnect the old range: Unplug the power cord and carefully disconnect the gas line from the old range. If you’re not comfortable doing this, it’s best to hire a professional.
Prepare the new range: Remove any packaging from the new gas range and make sure it’s compatible with your gas supply type (natural gas or propane).
Install the new range: Slide the new range into place and make sure it is level. Connect the gas line and tighten the connection securely. Plug in the power cord.
Test for leaks: Turn on the gas supply and use a soapy water solution to check for any gas leaks. If you detect a leak, immediately shut off the gas supply and contact a professional.
Follow manufacturer instructions: Refer to the manufacturer’s instructions for any additional steps or safety precautions specific to your gas range model.
Enjoy your new gas range: Once everything is properly installed and tested, you’re ready to start cooking on your new gas range.

Conclusion

In conclusion, replacing a gas range involves several important steps that should be followed carefully to ensure a safe and successful installation. Here is a summarized list of key points to keep in mind:

Safety first: Before starting any work, turn off the gas supply and ensure proper ventilation in the area.
Measurements: Take accurate measurements of the new gas range and the available space to ensure a proper fit.
Disconnecting the old range: Shut off the gas valve, unplug the range from the electrical outlet, and disconnect the gas line.
Preparing the new range: Remove any packaging materials and accessories, and check for any installation requirements specified in the manufacturer’s instructions.
Connecting the new range: Install the new gas line, ensuring proper sealing and tight connections. Plug in the range to the electrical outlet.
Testing and final steps: Turn on the gas supply, check for any leaks using a gas leak detector or soapy water, and perform a test run of the range to ensure proper functionality.

By following these steps, you can confidently replace your gas range and enjoy its benefits in your kitchen. Remember, if you’re unsure or uncomfortable with any aspect of the installation process, it’s always recommended to seek professional assistance to guarantee a safe installation.

Frequently Asked Questions

Q: FAQ 1: How do I replace a gas range?

A: To replace a gas range, follow these steps:
1. Turn off the gas supply to the range by closing the gas shut-off valve.
2. Unplug the range from the electrical outlet.
3. Remove the grates, burners, and any other removable parts from the range.
4. Disconnect the gas line from the range by loosening the connection with a wrench.
5. Carefully slide the old range out from its current location.
6. Slide the new range into place, ensuring it is level.
7. Connect the gas line to the new range by tightening the connection with a wrench.
8. Reinstall the grates, burners, and any other removable parts.
9. Plug the new range into the electrical outlet.
10. Turn on the gas supply and perform a leak test to ensure there are no gas leaks.

Q: FAQ 2: What tools do I need to replace a gas range?

A: To replace a gas range, you will need the following tools:
– Adjustable wrench
– Screwdriver
– Level
– Gas leak detector solution or soapy water
– Safety gloves
– Safety goggles
Please note that the specific tools required may vary depending on the make and model of your gas range. It’s always a good idea to consult the manufacturer’s instructions or user manual for any additional tools or precautions.

Q: FAQ 3: Can I replace a gas range by myself or should I hire a professional?

A: While it is possible to replace a gas range by yourself, it is recommended to hire a professional if you’re not familiar with gas appliance installations. Gas appliances require special handling and safety precautions to avoid gas leaks or other hazards. A professional installer will have the necessary expertise and knowledge to safely disconnect and connect the gas line, ensuring proper installation and minimizing the risk of accidents. It’s better to prioritize your safety and seek professional assistance if you have any doubts or concerns.

Q: FAQ 4: How long does it take to replace a gas range?

A: The time it takes to replace a gas range can vary depending on various factors, such as the complexity of the installation, the accessibility of the gas line, and your level of experience. On average, it can take anywhere from 1 to 3 hours to complete the replacement process. However, it’s important to allocate additional time for tasks like reading the manufacturer’s instructions, performing a gas leak test, and ensuring proper leveling and alignment of the new range. Taking your time and following all safety procedures is crucial to ensure a successful and safe installation.

Q: FAQ 5: Do I need to shut off the gas supply before replacing a gas range?

A: Yes, it is essential to shut off the gas supply before replacing a gas range. Locate the gas shut-off valve typically located near the gas meter or where the gas line enters your home. Turn the valve to the ‘Off’ position to stop the flow of gas. This step is crucial to ensure your safety and prevent gas leaks during the replacement process. Always remember to exercise caution when working with gas appliances and consult a professional if you have any concerns about the gas supply or shut-off valve.